-
Active Member
What is this plug for?
I found this when I was tracing wires.
2014 RT Base model. It's by the front right side next to the plugs for the fog lights.
Thanks...
Sent from my SAMSUNG-SM-G935A using Tapatalk
-
Very Active Member
I have an 11 RTS. And that looks like the plug for the frunk electric release.
Sent from my SAMSUNG-SM-G920A using Tapatalk
2007 M109R LE - To many MODS to list. Its cheaper that way!!!
-
Very Active Member
Here's the thing....
Don't know but if everything is working don't worry too much. They make one harness for that model and have connections that may not be used on yours. You can add them and just plug it in what ever it goes to....
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
-
Originally Posted by safecracker
Plug for frunk switch.
This is the correct answer. To the original poster, when looking at the Spyder from the front, you should see a micro switch on the left side of the frunk latch. That's the wire which plugs into the back of that switch.
-
Last edited by SpyderAnn01; 03-28-2017 at 06:48 PM.
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
2017 F3T-SM6 Squared Away Mirror Wedgies & Alignment
2014 RTS-SM6 123,600 miles Sold 11/2017
2014 RTL-SE6 8,600 miles
2011 RTS-SM5 5,000 miles
2013 RTS-SM5 burned up with 13,200 miles in 13 weeks
2010 RTS-SM5 59,148 miles
2010 RT- 622
-
Active Member
Thanks everyone. I will go with frunk switch. Must be a leftover from previous years.
Sent from my SAMSUNG-SM-G935A using Tapatalk
-
Very Active Member
Originally Posted by markyodo
Thanks everyone. I will go with frunk switch. Must be a leftover from previous years.
Sent from my SAMSUNG-SM-G935A using Tapatalk
It's the connector for a dual purpose microswitch. With the frunk lid closed it closed the ground side of the electric frunk release so the panel switch would open the frunk. It was standard on the RTS and RTL through 2013. 2014 on it's an option for all models. With the frunk lid open it closes the circuit for the frunk light which is standard on the RTS and RTL. It's an option for the base RT.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Originally Posted by SpyderAnn01
Mmm
Ann,
Are you thinking about buying a switch, and seeing what happens next??
-
Very Active Member
Dcoes anyone have the part # for the Switch and Dash Button?
Originally Posted by IdahoMtnSpyder
It's the connector for a dual purpose microswitch. With the frunk lid closed it closed the ground side of the electric frunk release so the panel switch would open the frunk. It was standard on the RTS and RTL through 2013. 2014 on it's an option for all models. With the frunk lid open it closes the circuit for the frunk light which is standard on the RTS and RTL. It's an option for the base RT.
I've got the 15 base RT and its been a couple years since we traded the 11RT away, but still miss the utility of having the "pop a Frunk" option. Now if I could get a remote FOB operated version!!
Lamont??
Last edited by AeroPilot; 03-29-2017 at 11:44 AM.
Reason: frunk
-
Very Active Member
Originally Posted by AeroPilot
I've got the 15 base RT and its been a couple years since we traded the 11RT away, but still miss the utility of having the "pop a Frunk" option. Now if I could get a remote FOB operated version!!
Lamont??
Electric actuator was one of the first farkles I put on the 2013 base RT I had. Short time later learned all you have to do is press the key down and turn it even when the engine is running to open the frunk. Decided then and there the actuator had been a waste of money! Can't say as I miss it at all on my 14 RTS.
2014 Copper RTS
Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|