-
Very Active Member
Let the farkling begin......
Well the sun finally came out today, so this afternoon I started working on the bike. I decided to start on the easy ones, and just keep taking panels off, and then when I get to the harder ones, the tupperware will already be removed.
So today I got the rear turn signal LED's installed. The reverse light LED's installed. I switched out the antenna for the "Value Accessories" shortie antenna. I probably did far more work to get this antenna out than I had too, removing the whole side of the tupperware to get to the antenna base. But, as I said, I need it off later anyway.
I got the Front grills installed (from Pierre and Spyder TV) and I got the Glo-ryders on.
I hope tomorrow is as nice, I have a bunch more to do......
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
Sounds good. Try to post some pics when done.
Was nice here to the south of you too until it rained mid afternoon but it is sunny again now.
You ever get down to the Penticton area?
Gary
States visited by Bike
-
Very Active Member
Originally Posted by cognaccruiser
You ever get down to the Penticton area?
Gary
I do from time to time, still hoping for insurance apr 1st, but we will see.....
I'll take pics tomorrow.
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
-
Very Active Member
Originally Posted by Bob Denman
It's been along winter here, and I've been collecting farkles..... 6 or 7 more to go on.
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
Not a nice day ... again. But i still kept farkling. Instead of outside, i decided to put in my sequential turn signals in the mirrors.
IMG_3074.jpg
It's a bit of a job getting the mirrors apart, but I didn't break any of the tabs. The worst part, and still not fnished, is getting the double sided tap off the back of the mirrors. In "finless bob's" video, his had a few pieces on the back of the mirrors, mine were a one piece, full size and shape of the mirror.
Anyway, back to work tomorrow, so farkling will have wait until next weekend. Maybe the sun will come out again by then
Ray
Last edited by bcer960; 03-27-2017 at 12:00 PM.
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
[
It's a bit of a job getting the mirrors apart, but I didn't breat any of the tabs.
Ray[/QUOTE]
Ya, I just broke one of those tabs or at least I think it must have been me unless it was damaged from before. I bought a replacement and a spare for the right side. Damn things are expensive. Those magnets are looking pretty interesting.
Gary
States visited by Bike
-
Very Active Member
Originally Posted by bcer960
Well the sun finally came out today, so this afternoon I started working on the bike. I decided to start on the easy ones, and just keep taking panels off, and then when I get to the harder ones, the tupperware will already be removed.
So today I got the rear turn signal LED's installed. The reverse light LED's installed. I switched out the antenna for the "Value Accessories" shortie antenna. I probably did far more work to get this antenna out than I had too, removing the whole side of the tupperware to get to the antenna base. But, as I said, I need it off later anyway.
I got the Front grills installed (from Pierre and Spyder TV) and I got the Glo-ryders on.
I hope tomorrow is as nice, I have a bunch more to do......
Ray
Ray, Which Front grills did you get( from Pierre and Spyder TV)?
I got the Front Grills also from Pierre & Spyder TV, here is a picture of the grills that I got : Spyder Grills RT 003.jpg they are stainless steal. Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
Originally Posted by Deanna777
Ray, Which Front grills did you get( from Pierre and Spyder TV)?
I got the Front Grills also from Pierre & Spyder TV, here is a picture of the grills that I got : Spyder Grills RT 003.jpg they are stainless steal. Deanna
I got the two spiders from Pierre. I have installed them, but I think I'm going to take them off, remove the rubber, and spray some contact cement on the back and attach some bug screen to the back, then re-install them. The hole in the spiders looks pretty big to me. Have you had any issues with things getting through his grills.
I bought the matt black ones, am really happy with how they look.
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
Originally Posted by bcer960
I got the two spiders from Pierre. I have installed them, but I think I'm going to take them off, remove the rubber, and spray some contact cement on the back and attach some bug screen to the back, then re-install them. The hole in the spiders looks pretty big to me. Have you had any issues with things getting through his grills.
I bought the matt black ones, am really happy with how they look.
Ray
Ray, Good luck! No, I have not had issues with getting things through his grills. of your grills.
Deanna
Current Spyder - 2023 F3 LTD Special Mineral Blue
Red LED NANO Saddlebag Marker Lights with Full Illumination
Sequential Fender LED'S (Amber/Red) with Safety Reflector
Dual Power Plate (12 V & USB ports)
Gremlin Bell
Rear Trunk Organizer (4 holders, 2 Elastic Holders)
Lamonster "Top Cuff" with adjustable drink Holder
SpyderPops Missing Guard Belt
Console Accent Trim (Carbon Fiber Domed Black)
Ultimate F3 Floorboards
Front Fairing Service Access Door Covers (Carbon Fiber Doomed Black)
Sway Bar with Links
Rolo Laser Alignment
Half Cover
A-Arm Daytime Dual Color LED Running Lights with Blinker Module
Hi-Viz DRL and Sequential Mirrors lights
Marinco 12Volt Power Receptacle with polarized leads & slide lock
Show chrome Trunk Shock
Former Spyder - 2014 RTS SE6 Cognac SOLD
-
Very Active Member
didn't get home till after dark last night, but tonight the sun is out, although it's only 3 deg.......
Anyway, here's a pic of the grills from Pierre at Can-am Spyder Accessories..see how big the holes are in the spider body? I am going to put bug screen behind it.
IMG_3076.jpg
and my new antenna from "Value Accessories"
IMG_3077.jpg
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|