-
Swaybar
New bee to Spyder so be patient. Just purchased a 2017 F3 Limitted and will ride two up a lot with lots of road trips pulling a trailer. I've noticed going down the road at times the bike just kinda drifts to the side of the road and wondering if I change the swaybar if that will help? Also how big of job is it on the F3. Thanks for advise!
-
Very Active Member
Originally Posted by I-Day
New bee to Spyder so be patient. Just purchased a 2017 F3 Limitted and will ride two up a lot with lots of road trips pulling a trailer. I've noticed going down the road at times the bike just kinda drifts to the side of the road and wondering if I change the swaybar if that will help? Also how big of job is it on the F3. Thanks for advise!
I can't help with the F3 part, but on a 2017 RT, the sway bar made a huge difference. I ride 2 up all the time, and I highly recommend it. The install took about 1 hour. just make sure you get the front of the bike up high. I had 16" clearance and it was still a little tight, but manageable.
Ray
2017 RT-S
Bump Skid - Spyderpops
Wrap - Wrapmyspyder
swaybar - Bajaron
Sena 20D & SM10
3 PC Mesh Zippered Lid Net Set - TricLED
A arm LED's - Safety LED's - TricLED
Mirror Sequential turn signals
Glo-riders
LED rear turn signals and reverse lights
Front Grills
Third Brake light
Larson Scanner
Light Up - Sue Hopper
-
Very Active Member
The swaybar is for cornering, the drifting is alignment. Look for a laser alignment shop near you.http://www.spydercomfort.com/dealersmn.htm
Last edited by Highwayman2013; 03-25-2017 at 10:58 PM.
2016 F3 Limited
2019 Ryker Rally
2014 Suzuki V Strom 650
2020 CSC TT 250
-
Very Active Member
Agree...
get a laser alignment ,check tire pressure and balance. That will help the drift...
Gene and Ilana De Laney
Mt. Helix, California
2012 RS sm5
2012 RS sm5 , 998cc V-Twin 106hp DIY brake and park brake Classic Black
-
Very Active Member
I had already had a laser alignment and the F3 still had a tendency to wander, especially on cambered country roads. The sway bar is also known a stabiliser bar. Once I installed the Bajaron bar, that tendency to wander disappeared.
The install is not too time consuming, as long as you can get the front of the Spyder high enough to drop the bar out vertically (something like 22" on the F3).
Pete
Harrington, Australia
2021 RT Limited
Setup for Tall & Big.... 200cm/6'7", 140kg/300lbs, 37"inleg.
HeliBars Handlebars
Brake rubber removed to lower pedal for easier long leg/Size 15 EEEEW boot access.
Ikon (Aussie) shocks all round.
Russell Daylong seat 2” taller than stock (in Sunbrella for Aussie heat & water resistance)
Goodyear Duragrip 165/60 fronts (18psi) - provides extra 1/2” ground clearance.
Kenda Kanine rear.
2021 RT Limited , Brake pedal rubber removed for ease of accessing pedal with size 15 boots. Red
-
All above are right I reckon
in order of priority
1 is check tyre pressures. Front tyres equal - better ride unless your roads have constant camber!
Then laser alignment, then sway bar if you like spirited riding
have fun
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|