Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Nov 2016
    Location
    California
    Posts
    7
    Spyder Garage
    0

    Default Cargo Box lock issue - need help

    2014 Spyder RT rear cargo box will not lock. Mechanism seems aligned & responds by closing when pushed on. Cannot find in manual. Nearest repair 3 hrs. away. Should I order new parts & just replace?

  2. #2
    Active Member
    Join Date
    Sep 2007
    Location
    Rome, WI and Mayfield, KY
    Posts
    86
    Spyder Garage
    0

    Default

    Have you had the rear Tupperware off? If so, there is a tab in the center that may not be in correctly. Seems to cause a variety of "catch" issues. Might want to double check.
    Lucky

    2015 RTS SE6
    2008 Harley Ultra
    1999 BMW R1200C
    1986 Harley Electraglide

  3. #3
    Member
    Join Date
    Nov 2016
    Location
    California
    Posts
    7
    Spyder Garage
    0

    Default Good tip Lucky

    Thanks for the tip. New owner & unsure what "tupperware" refers to. The box has not been off. Bike has less than 3000 miles on it and has been in storage so probably no work done it either.

  4. #4
    SpyderLovers Sponsor cptjam's Avatar
    Join Date
    Jul 2010
    Location
    Las Vegas, NV
    Posts
    3,850
    Spyder Garage
    0

    Default Lube

    Spray on WD 40, try to work it. Might be gummed up. Check all hardware for loose bolts. Joe
    Joe Meyer



    Dealer for the Outlaw/ROLO laser Alignment system

  5. #5
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    9,704
    Spyder Garage
    0

    Default

    Quote Originally Posted by Lindy View Post
    .... New owner & unsure what "tupperware" refers to......
    'Tupperware' is simply the nickname given to the plastic/poly coverings that need to be removed before you can see any of the real working parts if your Spyder!!

  6. #6
    Very Active Member
    Join Date
    Sep 2010
    Location
    Not Here
    Posts
    92,464
    Spyder Garage
    1

    Default

    If you have removed the rear body panel (The one tha covers the rear and sides of the top storage compartment), it's very easy to not get that very important tab in the right place...

    If you haven't: then I'd try some lubrication in the latchwork first.
    Good luck!
    2010 RT A&C, RT-L, RT-L , Orbital Blue, Cognac, Jet Black

  7. #7
    Member
    Join Date
    Nov 2016
    Location
    California
    Posts
    7
    Spyder Garage
    0

    Default Thanks

    Getting out the W-D to see if it helps.

  8. #8
    Member
    Join Date
    Nov 2016
    Location
    California
    Posts
    7
    Spyder Garage
    0

    Default Thanks from newby

    Quote Originally Posted by Peter Aawen View Post
    'Tupperware' is simply the nickname given to the plastic/poly coverings that need to be removed before you can see any of the real working parts if your Spyder!!
    That was my first guess, but you know you should never "assume" anything. Appreciate a straight answer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •