Gas and temp gauge

[kamper]

I diconected my gas and temp guages and like it on the center display but what are some good ideas for the two spots on the dash?

[hschuchman]

I placed a volt meter on the right and a RAM base mount on the left for my GPS.

[quasi]

IMG_1977.jpgI installed a dual usb port on one side and a volt gauge on the other. used a 52mm gauge blank to install the usb port in and snapped the blank into place.

[SpyderAnn01]

If you search on 'disconnect gauge' you'll get several pages of ideas on what to put in their place including how to instructions on some and purchasing information.

[Bob Denman]

Warp speed Indicator
Di-Lithium Crystal Status

Vulcan Humor.jpg

[CapeSpyder]

I did a clock on my left and digital volt on right

CapeSpyder
Sent From my Note 5

[ARtraveler]

Warp speed Indicator
Di-Lithium Crystal Status

Vulcan Humor.jpg

And...as usual...you beat me to the punch. Happy Monday.

[Chupaca]

If all esle fails....they make cover plates with nothing.... Then decide....

[M109Dreamer]

I placed a volt meter on the right and a RAM base mount on the left for my GPS.

+1

Sent from my SAMSUNG-SM-G920A using Tapatalk

[Bob Denman]

If all esle fails....they make cover plates with nothing.... Then decide....

Awwwww,,, Where's the fun in THAT?

[arf]

I would like to replace my gas gage for a 12volt plug. I heard you have to run a hot wire to the battery. I thought I could use power from the gas gage. Or do I need to run a power wire to the battery.

[Bob Denman]

It kind fo depends on what you want to do with it...
For a light application that is only powered when the bike is running: you could tap into just about any hot wire and ground that you find.
But for something with a bit more "pull", and is always hot: go to the battery, and add a fused link.