Well, I've been thinking about getting a 17HMR for awhile. Had a Ted Williams 30-30 (basically a model 94 rebranded for sears). Was in nice shape, but not collectable like a pre '64 model 94. Buddy had a Savage 93R with a Nikon 3-9x40 on top. It was basically new with 6 rounds out of the box. So we traded...
My initial sighting in was impressive. Using A-17 ammo, I had 5 shots basically in one hole at 50yrds. Just a hare over 1/4" group.
Cleaning, well, I had to get a 17 cal rod, as obviously my 22cal rod wouldn't fit. But the issue was trying to get a patch small enough to fit the rod and the barrel. Well, did a little homework online, and found out that if you cut the head off a q-tip, leaving a 1/4" of the shaft, it will screw into the end of the rod nicely, and the q-tip squeezes perfectly into the 17's barrel. Makes cleaning a snap.
Can't wait to do a little squirrel management soon.
Anyone thinking of getting one, do it. Fantastic round.
My gun club only has a 100yd range. At 200 yards the winddrift on a little .17 grain pill would be substantial with just a slight crossbreeze. But I'm confident this gun/ ammo combo will produce 1 MOA and under. At 100 yards.
Can't wait to do a little squirrel management soon.
Cool, can you come by and take care of this annoying Blue Jay that seems to have a love/hate relationship with his reflection in my Living Room window!
'15 F3-S Pure Magnesium Metallic - Mad Max Edition
'15 Mclaren 650S Coupe - Aurora Blue
"You Were Really Flyin', When I Passed You Back There!"
Chuck
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
Cool, can you come by and take care of this annoying Blue Jay that seems to have a love/hate relationship with his reflection in my Living Room window!
I have a couple of them and they are both tack drivers. Looking to get a handgun in the same caliber.
Get yourself a T/C Contender frame, and a 12" barrel for that little beauty!
I've got a 22 K-Hornet that consistently gives me 1.25" groups at 200 yards.
My reason for suggesting the Contender frame: the trigger is adjustable down to some pretty sweet settings. My current handcannon (.375 JDJ) breaks like glass, at 31 ounces...
Last edited by Bob Denman; 01-06-2017 at 06:51 PM.
I have not seen that. Post up pictures! I have both a 22Mag and a 5.7mm handgun, but never saw a .17. Looking forward to seeing one!
That Savage is sweet! They do make great guns.
Ive been wanting one for years. As well as a 5.7 handgun. The only thing that keeps me from buy a .17 HMR is that its rim fire and that the cost of the ammo.
Sent from my SAMSUNG-SM-G920A using Tapatalk
2007 M109R LE - To many MODS to list. Its cheaper that way!!!
Ive been wanting one for years. As well as a 5.7 handgun. The only thing that keeps me from buy a .17 HMR is that its rim fire and that the cost of the ammo.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Ammo is prevalent in my area, and cheaper than 22 mag. I got 200 rounds of A17 for $45.00 at Walmart.
I also want a 5.7 However the cost of that ammo is outrageous, not to mention scarce.
HIJACK!!!
Well, not really a hijack, just a variation................
I have been wanting to latch onto an older 12 gauge side by side for quite a while and final latched onto one a few days ago. A Stevens 311A, modified and full. The action is tight and after a bit of cleaning and light lubrication, works excellently.
The bluing is 95% gone from the metal, which required a bit of rubbing with gun oil and 0000 steel wool and resulted in a really nice (IMHO) browning/white patina with surprise, surprise, no pitting. The previous owner had slobbered polyurethane over the wood, leaving it an ugly mess. A couple of hours rubbing with steel wool and tack cloths and some tung oil to finish it off, and the rich walnut is showing again but without the shininess. (Still have the foreend to finish.)
The chokes are what they are, and with mod. and full, I'll definitely have to improve my shooting at the clays if I want to score well. Hope the weather is good to pattern it tomorrow.
HIJACK!!!
Well, not really a hijack, just a variation................
I have been wanting to latch onto an older 12 gauge side by side for quite a while and final latched onto one a few days ago. A Stevens 311A, modified and full. The action is tight and after a bit of cleaning and light lubrication, works excellently.
The bluing is 95% gone from the metal, which required a bit of rubbing with gun oil and 0000 steel wool and resulted in a really nice (IMHO) browning/white patina with surprise, surprise, no pitting. The previous owner had slobbered polyurethane over the wood, leaving it an ugly mess. A couple of hours rubbing with steel wool and tack cloths and some tung oil to finish it off, and the rich walnut is showing again but without the shininess. (Still have the foreend to finish.)
The chokes are what they are, and with mod. and full, I'll definitely have to improve my shooting at the clays if I want to score well. Hope the weather is good to pattern it tomorrow.
C'mon SPRING
Nice SxS. But, you know the rules.... Can't tease us like that. We need pics...
17 HMR. Wow I like this thing.
Reply With Quote
Let us know how it shoots at 200 yards... 
Originally Posted by Bob Denman
