-
Active Member
F3S Power Port FWD accessory power
I'm trying to determine the best location to install a 12V power port off of the provided forward customer accessory wiring... I have the rear under seat 12v socket but want a dash area mounted socket to provide power to other accessories. Curious where others have mounted their power sockets. Any pictures of installs appreciated... I'm currently considering a surface mount just forward of the gauge package but am open to other ideas. This would allow powering of my GPS which mounts on the crossmember bar of my F4 custom windscreen....
Thanks for any feedback or options !
Just cause you got the monkey off your back doesn't mean the circus has left town. - George Carlin
Hollywood, Maryland
2015 F3S, SE-6
oem backrest, oem saddlebags, F4 Customs windshield, oem fog lights
2011 RSS, SE-5
Handlebar Riser, Heat Wraped exhaust, Power ports int./ext., 23" touring windshield, Led brake lighting strips.
-
Very Active Member
-
Active Member
Thanks for the feedback !
Originally Posted by jcthorne
I looked at at that location as a possibility... Having an accessory plug in front of my gauges seems to be the only "con" with placing it there. The garmin power plug is pretty decent size. What do you usually power off of the port and is it used while driving ? Thanks again !
Just cause you got the monkey off your back doesn't mean the circus has left town. - George Carlin
Hollywood, Maryland
2015 F3S, SE-6
oem backrest, oem saddlebags, F4 Customs windshield, oem fog lights
2011 RSS, SE-5
Handlebar Riser, Heat Wraped exhaust, Power ports int./ext., 23" touring windshield, Led brake lighting strips.
-
Originally Posted by MDBrion
I looked at at that location as a possibility... Having an accessory plug in front of my gauges seems to be the only "con" with placing it there. The garmin power plug is pretty decent size. What do you usually power off of the port and is it used while driving ? Thanks again !
I feel the same way. I don't want anything to affect my view. I installed the USB port under my seat and have plans to install the mono seat for a water tight space for charging
Sent from my iPhone using Tapatalk
-
Very Active Member
I normally use it to power my Garmin but instead of the garmin 12v cord, I use the USB cord with a 90deg adaptor. Nothing is in front of my gauges.
-
Active Member
Follow-up solution
Ok, after looking at a couple different options I decided to go with a surface mount dual 12v/sub combo plug that mounted on the angled backside (fwd) of my gauge cluster. The surface mount 12v/sub socket set was attached with 3M 30lb double sided tape after cleaning all surfaces with alcohol and is very secure. All in all very pleased with the finished product !
image.jpg
Just cause you got the monkey off your back doesn't mean the circus has left town. - George Carlin
Hollywood, Maryland
2015 F3S, SE-6
oem backrest, oem saddlebags, F4 Customs windshield, oem fog lights
2011 RSS, SE-5
Handlebar Riser, Heat Wraped exhaust, Power ports int./ext., 23" touring windshield, Led brake lighting strips.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|