-
SpyderLovers Sponsor
F3-T Front Turn Signal Conversion Kit
A plug and play kit that converts your front turn signals into full time running lights and turn signals. Made in USA.
http://electricalconnection.com/inde...onversion-kit/
01331-kit.jpg01331-off.jpg01331-on.jpg
-
Active Member
-
I have this on my bike. They look GREAT in person.
-
Active Member
NICE!!!!!!
What about the F3 and F3-S????
I would love to convert my turn signals to running and Turn function.
-
SpyderLovers Sponsor
Originally Posted by DunaJ
NICE!!!!!!
What about the F3 and F3-S????
I would love to convert my turn signals to running and Turn function.
We are working on a kit for the F3 and F3S. TnCharlie has a set on his. We swap the sockets out, add a second filament and use an LED bulb. White running light and amber turn signal. We should have those ready by the New Year.
-
Will these work if you already have Lamont's amber LED strip that taps via connector into the existing turn signals and wraps around the mirror assembly
Thanks, Rick?
-
SpyderLovers Sponsor
Originally Posted by stebrock
Will these work if you already have Lamont's amber LED strip that taps via connector into the existing turn signals and wraps around the mirror assembly
Thanks, Rick?
Hi Rick. Yes, they will play together just fine. You will need to make sure the Lamonster LEDs are attached to the input wires and not the output wires. You will unplug the light at the 2 pin connector. The pigtail that goes to the light would be the output side, so connect to the other wires.
Last edited by lewis/ec; 12-15-2016 at 08:38 AM.
-
Very Active Member
Going to give one of these a try. Looks cool and well made.
-
Originally Posted by lewis/ec
Hi Rick. Yes, they will play together just fine. You will need to make sure the Lamonster LEDs are attached to the input wires and not the output wires. You will unplug the light at the 2 pin connector. The pigtail that goes to the light would be the output side, so connect to the other wires.
The Lamont LED's came with their own connector. Disconnect turn signal connector, plug new LED connector in, plug turn signal connector into the LED connector. So would your connector tie into to this setup?
Rick
-
SpyderLovers Sponsor
Originally Posted by stebrock
The Lamont LED's came with their own connector. Disconnect turn signal connector, plug new LED connector in, plug turn signal connector into the LED connector. So would your connector tie into to this setup?
Rick
Yes. Plug in our connector as the last one.
-
Very Active Member
Originally Posted by lewis/ec
Yes. Plug in our connector as the last one.
Do you have to wiretap Lamont's lights then, or will all the connectors plug and play?
Chris
2016 F3-T SE6
-
SpyderLovers Sponsor
Originally Posted by armyspydervet
Do you have to wiretap Lamont's lights then, or will all the connectors plug and play?
If he uses OEM connectors, then you can plug one in and make a daisy chain, plug & play.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|