Search:

I don't think this is true. I just got a set of the Show Chrome Slayer from Lamonster and it has the Show Chrome part number etched in the lens. I also have the Tricled HiViz mirror lights and they...

Yes. And I'm trying to determine if any improvements have been made or if people are still having failures?

Traded in our (aka wife's) 15 RTL for a 23 and it's time for all the mod fun to begin again. The 15 had the FenderZ from TricLED along will a lot of the a-arm lights and others of the 'smoked tube'...

Has anyone replaced the purge valve on a 2015+ RT? Svc manual just says to pull off hoses and replace. The valve and hose are held in place with a plastic retainer and push-pin. Did you replace the...

No additional baffles, just removed the stock cat and replaced with the RLS. This model has a baffle built in. If anything I think it has more acceleration and low end.

I put on the RLS cat delete about a month ago with stock muffler. I'm happy with it. It did change the exhaust tone and it's a little louder. I would do it again.

I wanted something a bit throatier but not obnoxiously loud. I wound up putting on just the RLS cat delete with stock muffler. The cat delete seemed to be of excellent quality, it does sound a bit...

No, sadly it can't be done. Want the digital dash, have to get an 18+.

Yea, I've been following that since the initial concept release, I even asked some Honda reps at AIM shows and nothing... crickets. But reports in June said several of the components are in...

Yea, I think that curve is the key. Wish I would have known about that sooner, I would have tried something like that first. Paul has them in his very capable hands and I'm sure he has the right...

I must have watched at least a dozen videos on this and most of them is as trikermutha says and you can get a chisel on the edge as indicated (most of these videos are boat trailer hubs including...

My first plan was to pound them out but I could not see any way to do so. The race seems like it is almost recessed in from the center of the hub, I could not seem to get on the edge of it through...

Yes, thank you so much for that amazingly generous offer. I will be in touch...

Funny thing is there seem to be 2 brands of bearings in it - both L44649, on each wheel the outboard one has a black...

I got a 2011 RT-622 from 2nd owner with supposedly low mileage and installed ground kit, new harness and PM on the wheels. I read just about every post on here (and all over youtube) about bearings...

Jack,

I have read lots of posts on the trailer bearings and in each one you recommend against the bearing buddies but yet many others do recommend them. I've even seen posts supposedly proving...

Look for a boot with a side zipper. I have Bates boots from working with the Fire Department/CERT, they are gore tex waterproof, composite toe and side zipper. They are very comfortable, protective...

I'm sending you a pair of reading glasses for Christmas since I don't think you read what I said :D

I never said anything was defective, rather underpowered, which apparently it is if its designed...

It doesn't matter what apps are running or what radios are on or how bright the screen is, if the USB port is working properly and the cable is good the phone should at least maintain a charge if not...

I was just going to ask the same question. My understanding is that warranties are considered insurance and is regulated by the state as such. You cannot buy extended warranties outside of Fla and...

Peter: Thanks for your reply but considering I can't actually use the jack until I figure out the placement and why it is not contacting the right areas its kind of hard to jack it up in the air to...

I bought a J&S with adapter pre-owned last year and just getting around to trying it and having some trouble... The jack doesn't come in contact with the center frame. The tube that comes off the...

I can't speak for the Russell as I have an Ultimate seat but I did want to say the backrest makes a HUGE difference. I wouldn't have any seat without the backrest. I'm sure the Russell is great and...

Or get fancy and put Glo Hub rings...

It's not mentioned much but I think zbunker is on the right track. It's called DPS and it is a computer setting. For some reason this is off alot. You need a good tech that really knows how to use...

Ride-On IS the balancer as well as puncture sealant. You don't want to use Ride-On AND the Centramatic balancers. If you are using centramatic balancers and want puncture protection use the Amerseal...

I think it depends on what you mean by 'handling' and what you think could be better. I don't agree that the sway bar is the best thing you can do - again it depends. Shocks are just, if not more,...

Be vey careful, I personally wouldn't lift from the frunk. At the very least get under the crossmember where the bottom of the frunk bolts in. But with an ATV/Cycle jack I would lift from the center...

Trick (as opposed to treat) L E D (each letter individually)

https://www.tricledusa.com/about for full details...

I am all Tric'ed out (TricLED) with their lights except for the HMT from Custom Dynamics. It's the only one that really does look like it's factory. It can be used as 3rd brake light only, running...

Now you're making me regret that I installed the Muth signal mirrors :(