Install Speed Bleeders and it is a quick, one man operation.
Type: Posts; User: LJspydee
Install Speed Bleeders and it is a quick, one man operation.
Sachs SG359011 Lift Support will work. I ordered from Amazon for about $15. I used it on the left side to double the lift capacity with a rack and a bag on the trunk lid.
Did you have to do anything besides remove the compressor, check valve and run the direct line? Any fuses or anything to do with the position sensor?
Spyderaccessories.com.
It was always fun talking to you at Spyderfest and reading you posts. Enjoy your new rides!
We'll look for you there!
Interested!
Our first RT had foot pegs and after years of riding with foot pegs, two wheel and Spyder, I didn't want floorboards. Our newest RT came with floorboards so I talked the dealer into giving me a...
A friend had a trailering cover that ripped while towing on an open trailer. He was not happy!
I've found that in heavy rain that lowering the windshield helps. I usually ride with the windshield all the way up to reduce the wind buffeting on my helmet. But lowering in rain keeps my helmet...
I always carry my multitool with plies and it keeps anyone without one from opening the frunk.
I used a bicycle cable and routed it under the upper LH tupperware panel. 161588161589161590
Sounds like I should start carrying a hammer! I've already installed a manual cable release for the frunk after having locked the key in the frunk 35 miles from home. Wife left her key at home. ...
To load our RT in our toyhauler I back up the ramp until the nose is close to the ground, then I place a pair of ramps behind the front tires and finish backing into the trailer. Our ramp is so...
We have a 2015 RTS model without BRP communication. I replaced the RH passenger volume controls with a dual USB port for my wife's phone and I pod. I wired it to a previously installed aux fuse...
Check out Southern Arizona Spyder Ryders on Facebook.
Countertops wore out already?
I mounted a fuse block under the RH panels. Picture is a little hard to see well, but there was room.
158183
A zip tie will keep you from losing them if they are pushed out when installing the tupperware panels.
Keystone Fusion Impact.
This works for us, although we recently traided the ATV for a Maverick Trail.157328
My wife and I will be going from Casa Grande, AZ for the first time to the rally.
Who is the "can am" that you are referring to? Dealer, factory?
Ditto! Ordered a top brake light on Friday, it arrived on Monday noon (a day earlier than the estimated delivery), installed an hour later. Freaky Fast!
We have a toyhauler with a high deck and a steep ramp door. I installed a winch in the toyhauler and pull our Spyder RT in backwards. When the nose gets close to the ground I put ramps behind the...
I've had good and bad buying and service dealings with the Chandler RideNow. At this point the bad has me never going back. I will consider Sierra Cycles in Sierra Vista.
I had the same problem spreading the rear pads to install the rear wheel and found out that you have to turn the piston to get it to retract. There are two holes in the piston that can be used. I...
We are interested and live in Casa Grande.
We're interested!
We are in Casa Grande and have friends in Chandler. Check out Syder Ryders of America-Superstion Springs Chapter on Facebook._