Instead of o-ring, I used a piece of a bike tube on top of the brp tensioner roller. Glued over the sanded (and scratched with my dremmel) with extra strong contact glue. Still holding great after a...
Type: Posts; User: Richardv
Instead of o-ring, I used a piece of a bike tube on top of the brp tensioner roller. Glued over the sanded (and scratched with my dremmel) with extra strong contact glue. Still holding great after a...
2013 is not the same exhaust system than 2008 - 2012.
......have you just mentionned thoses 2 words in the same sentence......!!!??!!!!!??? WOW, !!!! You got a big pair....!!!!! ;-)
....the dealer won't say anything.!!! ......other than we have to replace your front right tire. He is there to make money... And will sell you another tire in a year or so.
Get a lazer...
.......???...so....?????
I had that problem. It was the start button. While pressing it, wobble your thumb up and down. It will kick in. Ended up replacing the complete right handle module, under warranty, when the cruse...
180153180153I am 6’2”.
I just fold it over, pressed it , creating a crease in the plastic. After that, all that is left to do is to cut that flip over in order to turn around corner. Then just...
Hi, have a look. Simple to make, and has been doing the job for over 5 years 30,000miles. Just the plastic sheet from a 3 holes binder bought at the dollar store.
180112
180113
180114
Are your hi-beam on?
Kumbo KH16 does fit both fenders style, so does the Hankook v4. Both in the 175/55R 15 size.
ST is samething as an RT. Just has a ribbed strap. (if you don't believe me, check the frame part #.) parking brake is electric as an RT. So not obstruction.
Wrote you on this a couple years ago,...
I would be interested, if it is stainless steel, and at a decent price.... Probably for 2 units
Make a u-turn and measure how wide it took. Divide by 2. That is your radius
On my ST 2013, I identified that the USB adapter that is in the cigarette lighter adapter that I installed directly on the battery posts (above the frunk lip on the driver side, and yes there is a...
We did it with a RSS 2013. All was fine. ( I imagine a light bulb, is a light bulb....)
And check the teeths of the front and rear sprocket for a rock wedge in there.
Suggestion: This what I did, swap then inside out, outside in. You will be good for another..... Lots of miles.
And no,they will not be noisy by doing so. Clean the slot and a light sand on the...
It is SILICONE grease.
Just checked your ebay store, and can't find a 991 cat delete. The spider is a 2013 ST. Would you have such a model? I already have the Akrapovick. Muffler.
Thanks in advance for your reply.
.... this is what I want to hear... I was just looking for a confirmation of some kind... Thks Ron, you're making my day. !!! :-)
(P.S. for Chupaca, It was used at kind of regular interval during...
Hi,
I always follow the recommandation of 5,000 miles or one year for the oil change of my Spyders. I am always using Amsoil metric oil. But this year, for multiple reasons, I am getting close to...
BRP Engineers certainly could have installed the coolant bottle in the middle of the windshield. It would have been a lot easier to check and service. the oil reservoir should also be in that area....
What kind of oil are you using( brand and viscosity)
, and at what mileage was the oil change done?
It is a Quebec licence plate. So, yes, you most probably have seem it in one of Pierre video.
Look in the Meguiar product line. They have a plastic cleaner and restorer (#40 or 34) that will fix it. Sorry, I am not at my place to get you the exact number.
435,000 km on a 2 liter mitsubishi eclipse with a k&n filter. Still running as new. 285,000 km on a 5.9 liter Cimmins diesel, towing 13,000 lbs for 80% of the time, still running hard.... good enough...
...Yes, Toyo Proxie 4 in 225/50R15. see my signature
....I agree with Grandpot. Had the same problem, one spring after re-installing the battery for the new season. No error code, just heavy steering at low speed only. Thigthen battery connection, and...
...proxie 4 !!! Very predictable, and keeps it performance with wear.
So far, I removed 4 of thoses bolts with the proper hex 1/2" socket and my 24" bar. You apply torque, the bar start to bend and the bolt give. Just make sure you have the proper size socket, and that...