Search:

Again, how old is the old battery? Maybe it just needs a good charge!! If you have just been going out in the garage and starting it, thinking you're doing the bike some good and making yourself feel...

:roflblack: Sometimes you just have to laugh at the way we get things done! I have pictures in my head of going out to the shop and tearing the skirt off my bike, gloving up two pairs of gloves up to...

If you haven't tried to give that battery a good charge, I would try that first before giving up on it! That is once you get the seat up. Good luck with you, and the bike and get on the road for some...

Use your straps pull it from both directions, and what I would do is take a couple 2x4 and screw them down to your wooden deck in the front with some screws so you can just take them off when you're...

nice idea!!!

I would say, do not over think this job and for safety's sake, don't let the motor warm up as much as much as you're doing. With today's oils, bringing it up to luke warm would get the job done just...

:agree:

:popcorn:

If you're not sure, just do a search at the top of the page; and let your eye's bleed in pain reading!!!! Trust Us!!!!!

www.canampartshouse.com/oemparts/a/cam/5a3440b787a86602182dd0cf/fuel

Most hardware stores, auto parts stores will have what you are looking for.

I would say you're lucky you got them that close!:ohyea:

I would make sure all your fluids are up where they should be and go out and ride it and see if it happens again. If so, take notice of what's going on, gauges, lights going off, ect. Then get back...

I looked it up on a Can Am parts site and your year and model don't show a Schraeder valve! You have the auto system but no valve in the parts list that I could see! :dontknow:

Sometimes we worry a thing to death! Talk to your dealer, come back and tell us what he said, because we all are going through the same thing you are, and we are still running the roads just...

And hopefully no one in their shop's a member of this site!:popcorn:

There is a world of things going on there and it is or should be a simple thing to do, but it isn't! When you loosen your shaft do not back it off finger loose, leave it a like on the snug side to...

We have some awesome sponsors on this site, and Ron is one of them! I have bought several things from him and always been pleased with his service and help. If you ever have a question or need for a...

It sounds like you have it all under control and handled, and fully capable! :lecturef_smilie: Good luck!

https://www.youtube.com/watch?v=VbfFLIQ_PsU
You tube is your friend!! Have fun, easy job!!

:popcorn:

How's it drive and handle?

What year and model??

We have all done it at least once!!!:2thumbs:

I would say you got to go there and take it for a ride and see if you can make it do that noise, if you can, then they didn't fix the problem; if you can't, then they found the problem with that...

Where's your spyder behind it?:2thumbs:

I have read your posts and I think sometimes a person can worry a thing to death! Put the things in and get them somewhere close to where you think they should be, and ride it in the dark and see how...

My, My, you look like you're having fun! Got her all undressed!!!:2thumbs: Mine looked like that a couple weeks ago. Plugs, wires and an air box mod!

:agree: If your ramps are too steep you are facing to do something like said above, or parking with the nose of the trailer in the air to get the back down!

Treal Proformance looks like it specializes in Ryker and CVT set ups. I think he's looking for a clutch kit for a standard style 998 set up!:dontknow: I may be wrong!!