My 2020 F3L was missing ALL of the metal clips that secure the dash trim to the dash. Needless to say it could move and squeak. Once the clips were procured and installed, no more issues. If...
Type: Posts; User: jwulf74
My 2020 F3L was missing ALL of the metal clips that secure the dash trim to the dash. Needless to say it could move and squeak. Once the clips were procured and installed, no more issues. If...
We have the same Neotec and SRL setup... took a little bit to carefully trim put the bit of plastic for the mic to fit but it works well and you can't tell I even modified it.
Same color combo as mine. It is "more red" that the Pheonix Orange... but not much... lol
I put a dark tinted windsheild (after.my profile pic) from Lamonster (Bought and installed by...
None. Only the stock will fit without any modification. Noone has found a drop in that is that exact size of 4.5".
Rear fairing for a 2019 F3T is 708302912... Can Am part website in F3T section 09-Body and Accessories Cargo. 100L on the exploded view.
2018 does have a different part number, but the 2018 is...
I will say that the woofer outputs seem to be full range. Without access to a real time analyzer I can't say for sure, but using a tone generator on my phone via Bluetooth to the Spyder it played...
My wife has a 2018 F3T and I have a 2020 F3L. There is a big audio difference between the 2 where hers "pops" at higher volumes and it doesn't play nearly as loud as mine. Both are on the latest...
We put a topcase on my wifes 2018 F3T. The only real trick to a "quick" removal is the braided ground strap. The bolt they attach it to has a nut on the back and part of the rear needs to be undone...
Looks like $170 for a 2018 anyway... black.... part 708001788.
Yeah, might have to have them align mine next time... mine was supposedly done at another dealer when I bought it and I know they have the equipment, but hadlebars are canted to the left and the...
I plead the 5th...
Wow, 95 sensitivity on the MMats.... really high compared to others... but only play down to 120 hz...
Been looking for something to put in our F3's...
Good idea. Didn't know they had a tone generator app. I might try that... Probably disconnect one speaker at a time though to avoid having to try to hear the shift...
Back in my just out of...
I turn the Onkyo on in the garage... everyone has a system with a subwoofer in the garage right? :roflblack:
So, I don't think the 2018+ F3T/LTD topic has been done quite to death yet...
Does anyone know or have a contact or contact suggestion at BRP so we can find out the crossover point of the internal...
Sounds like the battery is starting to show its age... if it gets worse, probably time to replace it. We average about 3 years on ours even with battery tenders.
Y0ep. Sturgis is super busy already too. Constant bike noise from the interstate at our place. I think thier estimate of 250k might be low this year... but since noone can.go anywhere else and...
Those magnets are strong... be sure to keep razor blades away from you work area so you don't get one stuck in your thumb from about 6" away... ask me how I know....lol.
So, with this handheld device, if you have 2 different spyders can it be used for both? Or is it pretty much married to the one it is programed for? 2018 F3T and 2020 F3LTD for reference...
On my lift, sometimes it needs to go up a bit to release enough pressure to be able to flip the lever to let it down...
We bought one that is no longer available... so when.we needed a second for our Commander we bought the Harley one
Haven't had that problem on either of ours.... I would say proper riding boots and pants... otherwise, cat delete.
Shouldn't even need to let it sit... just ride... as said above, if it doesn't go off after a couple seconds during the normal.course of riding, it needs to get checked out....
I looked at doing that on mine... I think all it might take is removing the topcase and then also removing the LinQ bracket. I put a topcase on my wifes F3T and the places that the cover would go...
Not sure about the F3 and F3S... but I know my wifes F3T is...
Lean your body into the turn a little more... and try planting your outside foot.
Could be wrong... but since it's a CanBus system there will be no possibility to use an OBD2 scanner.
I would assume though that there should be a way to pull any active codes like on the RT's and...
The box one is ok and has a different name on it even though it is a BRP sold part... can't remember at the moment... the 3rd party part that causes issues for some is the apple 30pin to...
We ran JT's without the additional guard... no issues at all without it.
The city didn't really have a choice... people were going to show up no matter what. By keeping it official, that allowed them to put rules in place for vendors, out on the streets/sidewalks, and...