Search:

I use Lemon Pledge......works OK.
You can use the Orange Pledge for a change of pace ;)

Just pry gently with a screwdriver blade.
But you do have to rotate the linkage around to where there is enough room for it to come off.
Same story when you have to put it back on, the linkage must...

There is a complete confusion of units as there is no conversion possible.
If, however, the service bullitin meant g/M2 then you would give you 84000 on the Gates meter.
I suspect that the two...

I have mine set at 135 and it seems tobe working well

Tried on several in the shop.
Settled in on the Shoei RF1000 as the most comfortable.
After riding with it a while I have shaved some foam (about 1/4") out of a couple of areas in the padding where...

60 When I got the 08 SE-5
Not my first bike, but I haven't ridden in years.
Loving it. :doorag:

Rotella Syn T in it now.
Changing it to Mobil 1 4T as thats what was in the store. The Rotella T shelf was empty!:shocked:

I'm planning on having the Rotella sent out for an oil analysis so we...

:agree: I was wondering if the fuel in the fuel lines could boil after shut-off. Since the vapor couldn't exit via the injectors it might bubble up from the fuel pump giving the impression that the...

On another of the forums a couple of owners have smelled gas after a 70mi ride and on opening the tank have seen it "boiling". One owner that saw this has a brand new RT with only 200mi or so on the...

Yeah, on the morning commute I see pretty much the same cars everyday.
As well as the same idiots who will pass me like I'm standing still only to wait at the same light just ahead of me.....day...

Custom seat, seat switch disconnected?:dontknow:

Don't keep us in suspenders :roflblack:

I have 5500 mi on the Spyder and just getting ready for a trip to NC.
Replaced the battery with a new Oddessey battery. The Yuasa was getting weak.
Changed the Y pipe gaskets (the old ones were...

Put narrower tires with harder rubber on the front wheels and that oversteer will go away :roflblack:

I kind of like this one from RTR in England.
Powered by a Yamaha R1 engine and rear swing arm.
The Tr1ke.
http://www.smartsrus.com/images/rtr_tr1ke/tr1ke_edit_side_640.jpg

:agree: and there's a sensor gauge for adjusting in the Spyders tool roll.

I think that you'd be happier with one of these.
Ultra_Trek_1-Piece_Air_Mesh_Kevlar_Suit

When you include the aero-tex liner it's waterproof and yet still breathes.
You don't need to add the...

You only have to get the belt off of the back sprocket.
Jack up the bike on the frame and remove the lower bolt from the shock and let the wheel drop down. then slide the belt off and zip tie it to...

I went with the Oddessy PC680

I also recommend the Throttlemeister.
Ease of installation and it reduces handlebar vibration.:ohyea:

Well, yeah.......now we know that.:shocked:
But at the time it was a surging problem that the update was supposed to fix.
I think that they added the extra length of hose because of either the gas...

Pretty sure I remember in one of the updates that changed the cycling of the vent solenoid that BRP added a longer hose to the cannister that went forward and exited thru the splash plate behind the...

Yes it was. So a large number of Spyders have probably been altered and thus the marked reduction in fires.

Do I remember right that this particular Spyder had not had that done?:dontknow:

But I can.....:D
Cannisterectomy

I have the ESI 4" risers and the Madstadt shield as well as the CHAD.
There is no interference with either shield.
I am 6' 0" and both shields stay out and away from the body of the Spyder to get...

I'll take one! :2thumbs:

I've read nothing but good things about the seat.
I guess I was expecting it to cost in the 700's not almost 900.....thus the shock.

This is the reply that I got when I asked for a quote from the Kontour Seat Kontour Seats

Here is what he said:

Hi Paul:

$875.00 for the Spyder seat as requested. Sorry, we don't ever offer...

This one looks interesting Kontour Seat after reading a review here at Web Bike World

Anyone had any experience with Kontour?

yeah, but it's a dry heat.........:D

Classic video......


http://www.youtube.com/watch?v=SXn2QVipK2o
:D