If he uses OEM connectors, then you can plug one in and make a daisy chain, plug & play.
Type: Posts; User: lewis/ec
If he uses OEM connectors, then you can plug one in and make a daisy chain, plug & play.
Yes. Plug in our connector as the last one.
Converts the front turn signals into full time running lights in addition to turn signals. All plug & play install.
...
Hi Rick. Yes, they will play together just fine. You will need to make sure the Lamonster LEDs are attached to the input wires and not the output wires. You will unplug the light at the 2 pin...
We are working on a kit for the F3 and F3S. TnCharlie has a set on his. We swap the sockets out, add a second filament and use an LED bulb. White running light and amber turn signal. We should...
The cost of setting up in Bike Week is unreal. The smallest booth is a 10x10....barely enough to show, let alone try and install anything. That is $2000. Another 10 feet is another $1000. Plus...
A plug and play kit that converts your front turn signals into full time running lights and turn signals. Made in USA.
...
I don't know if you have ever had the chance to talk to Paul Pelland. He is sponsored by Yamaha, Twisted Throttle and several others to raise money for MS. He might be a good place for you to...
Here is a light we developed to replace the rear reflector. Wires in to the license plate light.
http://electricalconnection.com/index.php/product/can-am-spyder-rear-led-reflector-kit/
141021
We have put together a pretty good list on wire color codes:
http://electricalconnection.com/index.php/2016/03/08/motorcycle-wire-color-codes/
That appears to be a Tricled product based on part number.
I thought we destroyed all those pics? Lol.....they were indeed good times.
Lamont was part of that great group as well.
BTW....that cute little pigtailed girl I brought with me to those...
Fact. Here are some features:
The kit uses a PWM (pulse width modulated) controller that gives you complete control of the heat from 0 to 100%. PWM technology allows us to provide full power at 100%...
Raw wires on the end?
When you look at products, how much do you base the purchase of the part being plug and play?
Kendon is working on a trailer for the Spyder. Well built and made in USA.
https://www.kendonusa.com/product/trike-spyder-ride-up-srl-folding-motorcycle-trailer/
We are working on a complete turn key kit with mount, plug and play wiring harness and a more robust horn than the Stebel. The stock horn not only stays in place, but works with the air horn
...
You add it when you tow a trailer. The load of the trailer lighting is put into the isolator. That way you don't overload the factory wiring.
I am hoping to have an RT in the shop in the next few weeks....I'm a one man show in the R&D department.:yes:
Couple of new product updates.
1. Trailer Isolation. The F3 is done and complete. Working on the RT next....then the RS.
2. LED Headlight Bulb elements. We started selling LED headlight...
The Stebel is made in Italy. Wolo Bad Boy is all China.
Few points to consider.
1. Just because a circuit is fused at 5 amps, does not mean it uses 5 amps. You have to have a buffer in there to compensate for the 'current inrush'. The factor I use...
Finally have all the parts in house!
If you need to determine the components you need, use this chart: http://electricalconnection.com/wp/wp-content/uploads/2016/04/can-am-f3.pdf
Here is a...
My experience is always check the battery connections first. Don't use a screwdriver...use a wrench or socket.
Much appreciated! Let me know if you have any questions on the install.
Here is one of the kits. It makes your mirrors white running lights and retains the amber turn signals.
https://www.facebook.com/Electrical.Connection/posts/10153852171718609
Unless Can Am is using an oversized hole, all you would need to order from Bushtec is a Hitch Pin Adapter.
Thanks everyone. We are working on a bunch of new products now for the F3. Then the RS. Also trailer isolation for the RTs.
Lamont is working on a kit for the fenders right now!
http://www.spyderlovers.com/forums/attachment.php?attachmentid=127070&stc=1
Good morning. I've had several requests for a plug and play trailer isolator for the Spyder and am trying to wrap my head around this.
This is what I am trying to make....a wire that plugs in...