I know this has been beat to death over the years but.... Just had the dreaded sprocket failure on my 16 F3T SM6 Seminole Pwr Sports did the change out and BRP paid for it. All good, got 30k out of...
Type: Posts; User: Pat Clark
I know this has been beat to death over the years but.... Just had the dreaded sprocket failure on my 16 F3T SM6 Seminole Pwr Sports did the change out and BRP paid for it. All good, got 30k out of...
BRP approved my out of warranty sprocket repair. Mine had 30k+ at failure. They ordered a new sprocket and bolt. Hopefully I'll get it back by the end of the week. I love my F3T and was real lucky...
Well it took a few more miles than most but..... 30,500 miles. 2016 F3T SM6 yesterday the shaft splines on mine went. Bolt was not loose, I've never spun tires or done any crazy shifts. Luck was with...
This is my second Spyder. The first was a used 13RTL. Had one issue with the reverse switch (fixed under warranty) Made the mistake of test riding a 16 F3T. Traded the RTL with 45,000 miles on it....
I've had this problem with both the toyhauler than I just sold and now with the utility trailer I bought to pull behind the Class A.
Biggest issue is with the switch on the left by the transmission...
Hadn't thought about E track. I could maybe get away with screwing it to the floor vice through bolting it. Hmmmm Thanks
Looking for unconventional tie down solutions. Just bought a 2010 Coachman toyhauler. The only way I can install tie downs directly in front of the front wheels is to remove the trailer water tank....
I'm switching over from a cargo trailer/camper I built to a 2010 29' toy hauler. Ramp is much steeper than the cargo trailer. I have some ideas to reduce the angle but I'd like to see what others...
Good morning,
Biggest thing with me is the seat in hard. Sits up too high. I like the F3 because you sit down in it not on it like my previous RT.
I've got 18k on the bike and put a couple of...
Does anyone have a picture of the underside of their rear seat. I switched to an Ultimate Seat and don't care for it. Now I can't figure out how the spring goes on the latch post.
Thanks Pat
Thanks, Sounds like I need to do some digging for those screws before I head down Thursday.
Pat
Even though the 1330 doesn't use oil I still carry a quart of it. Hold over from the 998 I guess. But... you can run out of gas a bunch of times. You can run out of oil only once.
Pat
Question for anyone who has bought an Ultimate seat for their F3. If you didn't order it with the backrest, was the bracket for one already installed on the seat. I have Lamont's back rest from...
Anyone else having issues with this switch? I gave up today and just put a small tie wrap on it to keep the switch closed.
Pat
I went from a 13 RT LTD to a 16 F3T and added the top box. Have to watch out for my girlfriend falling asleep. One of the things I liked best about the F3's adjustability in regard to brakes, shifter...
I bought Lamonster's back rest and am very happy with it. The windshield is a Madstad. I like the way it mounts and adjusts. ...
LOL Didn't even notice.
Congratulations. I just rolled 11k on my mine today. Miles of smiles. Be safe, have fun.
Pat
Well the panel was on when we left from the diner. I've looked and looked and can't see how it could have come off. Dealer called me today and since I was in the area I stopped by. Beats them and...
Speaker grill and fairing on my F3T top box went flying yesterday somewhere along my breakfast ride. No flipping clue how it popped off or where. Never had any reason to pull the cover off so it's...
Just the four risers, the plate, (part 710) and the four long bolts .
Pat
Posted this on FB F3 Spyder Lovers. Thought someone here might like to see it. I had been looking for risers for my F3T and really couldn't find anything that would work the way I wanted. While...
I went through a number of them before I broke down and spent the money on Lamont's Spyder Cuff. Solid, held my phone and water/coffee cup. Can't be topped. ...
That's the problem. I have the top box and with it your flag holder which is the same one I have won't fit. Flag staffs are too long.
But thanks just the same,
Pat
Do you have the top box?
Pat
Has anyone found a flag holder that works well on their F3T or L. I had a licence plate mount on my RTL to hold my Ensign and Don't Tread on me flags but it won't work on my F3T. I've looked at a...
Pretty cool.
Pat
This looks like one of the easiest setups I've seen. Thanks.
Pat
Congratulations, give it a few rides and she'll be doing the leading. ;)
Pat
Has anyone found or manufactured a heel/toe shifter? I can live with what I have (16 F3T SM6) but this is a common set up on two wheel Cruisers.
Just curious,
Pat