I put a Honda Goldwing vent in my 2014 RT-S. I think it did some good but never tested it that throughly. The Spyder’s curve was slightly more so it wasn’t easy to operate but would with a little...
Type: Posts; User: Joerolwing
I put a Honda Goldwing vent in my 2014 RT-S. I think it did some good but never tested it that throughly. The Spyder’s curve was slightly more so it wasn’t easy to operate but would with a little...
Yes, it is a BRP cover
Price changed to $30 including shipping continental US
You don’t have the comfort seat do you?
36 mm wrench cut in half, 1/2” drive 36 mm socket for Spyder rear wheel removal, Midwest Service Manual on CD for 2014 RT series, and home designed and built tool easily turn Brembo brake pistons...
I don’t think it does.
Used but perfect condition $30 plus shipping from Nashville TN, original bag included.
Came off my 2014 RT-S, used but perfect condition, $200 plus shipping from Nashville, TN
Is the comfort seat the problem? I think the back of it is 2” further back from the handle bars.
You might also want to check Cherohala Skyway between Tellico Plains, TN and Robbinsville, NC also. Tapoco Lodge near Tapoco is a little on the expensive side but a nice place. Watch your speed on...
Is degradation of oil an issue with fully synthetic oil also, or is condensation enough of an issue by itself?
I had mine done at Spyders in the Ozarks a few years ago. You might check with Ron Athlon at BajaRon in Greenville, TN, 423/552-3720, fyredad@hotmail.com.
Joe
34,000 trouble free miles, bump skid, vented windshield, BRS belt idler, BRS back rest, 1/2 BRS cover, RAM cell phone holder, missing belt protector, air bag projector, lots of miles remaining on...
This is also a good time to install a missing belt guard
Cognac, approximately 34,000 miles, included windshield vent, Can Am backrest, bump skid, missing belt guard, air bag rock protection, laser alignment in Springfield 2 years ago, about 2,000 miles...
You might try using a frame with window screen rather than plexiglass.
I just had to replace the two master cylinder caps on my 2014 RTS because the o ring in them was deteriorated to the point of leaking.
I just put 11,978 miles on my 2014 RT-S SE6 from Nashville to Alaska and back without a single problem. I had an oil change and other service at the dealer in Vancouver, BC with high satisfaction.
Did you remove the two master cylinder caps?
You can purchase a tool to rotate the brake piston from BajaRon. Some are able to use needle nose pliers but this didn’t work for me.
Just one night camping on the way back, Boya park on the Cassiar on the way back. temps too cool. Very nice facility but lots of mosquitoes before the sun heated up the area.
May 1, 2019 to June 12, 2019 Adventure to Alaska-unfortunately I couldn't copy and paste pictures
My brother Otto and I go on long trips together once a year. We’ve done this for seventeen years, 16...
I have a belt model#705501304 that I purchased as a spare to carry on a trip to Alaska. It wasn’t needed so I would like to sell it for $225 delivered within the contiguous states. It was carried in...
Question for site administrator-can I post about a six page narrative of my trip to Alaska with pictures?
Thanks,
Joe
I have one for $225 here in Nashville for an RT. I purchased it to take to Alaska but didn’t need it.
I’m just now returning from Alaska, currently in Prince George, BC. I rode the Top of the World gravel at speeds up to 47. This has about 90 miles of gravel. Fortunately it was dry. I had had added a...
I’m returning from an Alaska adventure and need an oil change and rear tire replacement. I’m approaching 12,000 miles on a Michelin and would like to keep using a car tire. I would appreciate...
I left Nashville on May 1 about 3pm, rode 200 miles to my sister’s in SE Missouri. My brother and I left in rain the morning of May 2 in Kingdom City, MO. Friday, May 3 we rode to Ida Grove, Iowa,...
I’ve just been told by a dealer mechanic the DESS problem comes from interference from the radio antenna. I had this issue two years ago but it went away after about an hour. They added some thicker...
Bajaron sells a tool that makes it easy to turn the cylinders at a fair price.