Search:

Blueknight...Im going to stick with the OEM for now,(all on order).....When I bought Her, The owner had installed a 2Bro Vale system with the Juice box pro...I really need to replace the Slip-on...

I'm really looking at selling both my rides since the used bike market is also doing well. And pool my cash together for possibly a Ryker ;)
Thanks for input.

Hello...I have a 2012 RSS Spyder That I'm wondering how long I should hang on to it....I got to thinking about this when I called my local dealer to order Y pipe and mid pipe gaskets and he had to...

Probably would be wise to stick with a aftermarket tail light assy that uses the same style bulb as the Spyder?.....Just in case I need to stick with the OEM bulb.

Thanks again for info.

Thank You David for the part number!,....I guess Can Am probably doesn't ever think that lens would ever get damaged,....I did email Zadi but have gotten no response and probably wont...Looks like...

2012 Spyder RSS SE5,Right rear turn signal lens got broke off, turn signal lamp is undamaged,...Could not find replacement part number for just the lens in parts book so I ordered the whole assy....

Was able to clear code,....(I don't believe I was pressing down hard enough on brake pedal,when trying to clear fault),I told my youngest son that I need to borrow his ears for the second click.
...

OK....so the BUDS computer is sensing system pressure?,I will verify the Micro-switch at pedal is not faulty and will try to clear code manually again....Thanks again.

Been real busy with work and Grand-kids and just stuff popping up.....Any way I was able to call on a friend to help me bleed the brakes today,The Master Cylinder has always felt good and solid,not...

Thank you billybovine for all the help!!...I will try to get to it this weekend.

Can I bleed the system myself without BUDS?
Also is the low pressure switch built into the Master cylinder?

I opted for the engine not running method (thx billybovine for the 2 options)I got home from work late afternoon and because I have a pretty loud exhaust and didn't want to disturb anyone later in...

I thought about that after I posted (DOH)....Thank you!,Will get back ASAP.

Resurrecting an old thread here,....Im getting the infamous "brake failure scroll"... I have a 2012 RSS SE5 with right at 15k,....Brakes were bled with BUDS last year at dealer,..Problem just started...

Thank you everyone for responses!...also Thanks to jaybros for getting a part# and price...
I really do hope security can find something on the camera in parking lot...there is a camera right close...

Thanks...If I were to sand out and paint...how would you recommend best procedure in sanding..?and recommendations on paint?
Thanks

Somehow....someone managed to either back over or drive into my fender at work [hoping cams in parking lot will show something]...Any way just wanted to see if anyone had suggestions of possibly...

Thanks....I'm blind in one eye and cant see out the other(2012 right next to your Spyder picture)

Yes Sir....Yours 2012?

Thank you billybovine....I'll wire tie it up out of the way.Nice to know i have an aux power source if i need it.

165389165388165387
I have a 2012 RSS SE5 that has this connector that I've never noticed before,it's located at left upper control arm and if you look down the hole it has 2 female spade connectors...

Thanks Dennis....your right the K&N would be cheaper in the long run.

2 questions:
Removing airbox to access injector wiring so as to remove controller I noticed some oil in the airbox,...Is this something to be concerned about?
I read somewhere this can happen if...

Thank you Highwayman.

The wires are NGK (would this be the OEM wire)?I got a little bit of mis when I started it up tonight (all tupperware stripped off ),Did not see any arcing but did feel header pipes from each jug and...

Thanks BajaRon.Im hoping to look at it this weekend,if its the leads,do you have a set in stock?should i also change plugs?,i think i have approximately 8k on it.

Yes,I would like to uninstall the 2 Bro Juice box(I have no use for it,it was installed by previous owner) and check my leads while I'm in there....I heard Bajaron Has got really good leads and...

I have a 2012 RSS SE5 with 2BRO exhaust and Juice box pro with under 10k miles.....It had been sitting for about 2 months,When I started it up it sounded like it was only hitting on one...

Is wrapping the exhaust pipes something that should be done?ive never really thought about it.

Sent from my SAMSUNG-SM-J320AZ using Tapatalk

Thanks for the links,.....What do you use for mount? And any good ideas where to mount it on a 2012 RSS?
Id like to get a Bluetooth unit for my helmet but I dont think i would hear anything with...