Anyone have an easy way of taking belt off to change front sprocket instead of fighting to walking off.
TIA
Type: Posts; User: bmccaffrey
Anyone have an easy way of taking belt off to change front sprocket instead of fighting to walking off.
TIA
Can anyone tell me the torque specs on bolt of the front sprocket?
And what you using for grease or loctite on the spline?
TIA 😊
Heating the head of the bolt will do nothing, It the threads that hold it. Sorry elbow grease the only way
Hit the nail on the head. I have an oval head. Very hard to find helmets to fit the oval!
Quality Control Issue!!
This has been a huge problem which i think BRP should do a recall!!
Sorry for the loss
Prayers are sent:pray::pray::pray::pray:
Sorry don't agree with you. Closing the pipeline down and relying AGAIN ON FOREIGN OIL. Your going to see prices climb to well past 3.00 a gallon. Don't want to make it political but a spade is a...
Paper work a pain in the ass. Send it to you fill out notarize send back.
Got the spyder was filthy glue adhesive all over. None of the accessories i ordered were on it.
Sent after had to install...
I agree with all. PATHATIC
Thanks for info
Try Sea foam.
Can buy walmart or parts store. Worth a try!!
I agree!!
This will work. Will let air out but not back in
Unhook brake rod, Then unbolt foot boards Slide footboards bake where they line up with holes. All the way back is 1 position. Every time u move forward changes by 1. So goes 1-5. You will have to...
Either Russel day long or Seth Laam!
i agree!!
Brake motor is going bad. Common problem Mine went with 1300 miles.
There was a bulletin on them. Should be covered under warranty. I always carry 2 -12mm wrenches Even though it was replaced
yep!!
185867
Here's a picture of mine guys.
AWESOME NEEDLESS TO SAY!!
What's the trailer rated for as for weight??
I agree with you 100% Ron
I was sent an email the other day
Ingles Performance is dropping the Spyder Ryker Line and will also not be servicing the line
This is a shame they were one of if not the best in Upstate NY.
...
I put led fog lights radio went crazy. Put an isolator in helped. But when i really want to listen to radio leave lights off
Have you had the new buds update. Think it's 20 .something. Have 18 F3L Radio Rocks
3000 miles
Got lucky. My dealer running a special. 209.00
Lamonster recommends Loctite 648. Came from BRP Tech with 20yrs experience
184926
Love it has side shields that work awesome!!
I used a ball peen hammer. Worked well.
I have an oval head and bought LS2 for 75.00 works well.
Get this the cheaper helmet has a shatterproof shield the HJC doesn't Imagine that
1000 miles on fresh oil put up for winter and ride next year until oil change is ready.
Good to go!
Welcome to the Crazy World of Spyder Country