Personally, I would remove the tire and access the problem. Maybe just needs a screw or two. The fender can sometimes be awkward to handle , plus wiring, and remounting. MHO :thumbup:Good luck, Bill
Type: Posts; User: Knizar
Personally, I would remove the tire and access the problem. Maybe just needs a screw or two. The fender can sometimes be awkward to handle , plus wiring, and remounting. MHO :thumbup:Good luck, Bill
I have to say that the first and probably best thing I purchased from Lamonster Garage for my new 2020RTL was the handlebar riser, which took away the pain in my shoulders.
Next best purchase was...
Did you try jacking it up and spinning that wheel?
Congratulations on your new ride:congrats::clap::2thumbs:
You definitely got their attention, now we all have to give them a chance to fix it!
I believe I read something about the 2024 bars being a different size than the previous 2020 thru 2023, that the spyder cuffs on previous RT's didn't fit on the new 2024 handle bars. :dontknow: ...
You might check the drive sprocket for the "Red Dust", if your F3S hasn't had
that sprocket changed it is probably due! The white sprocket is NOT the final fix.
My 2 cents worth,, Bill:thumbup:
Honestly, I think they don't look that bad!
I have 34K on my 2020RTL, I'm going to hold off until 50K unless I detect a misfire.
Maybe a mistake, but really do think that 50k miles should...
I've seen that look, in triplicate!:roflblack:
I vote a "BIG NO" on 185/55's! Your looking for trouble with fender clearance.
I have 175/55R 15 on my 2020RTL and they just clear with no extra tolerance.
MHO :thumbup: Bill
Which makes sense to me, and should probably have the drive sprocket and rubber cushion bumpers installed too.
As much as to say a spin balance with the rear wheel mounted on the motorcycle.
That...
You will not regret it!:2thumbs::welcome: Bill
My 2020RTL will beep for about 15 seconds, definitely NOT 20 MINUTES!
OK! So enlighten me, never to old to learn! "What the :cus: is a Flux Capacitor?":hun: Bill
OOOPS, found it! at the parts store next to the blinker fluid and above the muffler belt.
:agree: What I said in post #4.:thumbup:
Maybe for aftermarket lighting on passenger foot pegs
Aftermarket Horn!
Me 2 !:agree:
Anything Kenda has a less structural carcass, and probably not be under inflated.
MHO Bill
:yikes: Rattle Can?:dontknow: Really!
I know the BRP paint job sucks, But a rattle can?
Go check with a Body Shop 4 a $ quote first.
Your wife WILL Notice if the spot in question is in eye...
:agree: "If I only could use one, this would be the ONE,"
:yes: Spyder Lovers! :2thumbs: Bill
Case of gallons is usually 4 Gals to a case.
:agree: It's like they forgot the seal coat, Which I believe they did!
Snoking, Maybe you should keep your conversations between you and your Hooker confidential!:shemademe_smilie:
People may begin to talk!:dontknow:
:chat: Bill:thumbup:
Doug, Tell it like it is! I commend you sir for explaining how these machines work. Hope a few others on this forum will let your explanation soak in. :thumbup: Bill
:agree: Same here with the 215, :thumbup: Bill
:agree: It's kinda like "love", :yes: If you never had it, you can't miss it! :ohyea:
I have not been able to get into "Spyder Lovers" since early yesterday morning!:gaah:
Do not think it's my PC problem:dontknow:
Guess someone must be working on the problem:clap:
I hear ya on the band aids! Seems like every project of mine lately turns into a "real project". Don't even know I'm bleeding until I see it dripping on everything. My skin must be thinner than rice...
I bet the results are not so good using beer!
YMMV
You want the flop down ramp on an enclosed trailer. Not barn doors!