I changed the front sprocket. It seems that it was the cause of the annoying noise. It had play on the splines of the transmission shaft and in the front sprocket. I'll update more as soon as I have...
Type: Posts; User: GabrieleItalia
I changed the front sprocket. It seems that it was the cause of the annoying noise. It had play on the splines of the transmission shaft and in the front sprocket. I'll update more as soon as I have...
Yes Mike, thank you. I still have both the lockite and the fat from the previous time. As soon as the spare parts arrive, I will update you!
Thank you. I'm ordering the parts. I'll keep you updated.
Hi Peter and thanks for your reply. I was just about to write an update of a further test I did. In fact, I lifted the Spyder on the hydraulic lift and checked it carefully and in fact in some...
Good morning guys, I did further testing this morning, and I always went to the top of the hill and then went down both with the engine in N and with the engine in first gear and the noise didn't go...
I will check the belt another time safecracker, just to be sure.
No, I have always used the same MOTUL 7100 5w40 full synthetic oil. Now I'm waiting to have a little more time to be able to...
Thank edmat. The noise is continuous from when I let off the gas until the Spyder stops, and as soon as it stops this vibration stops. I'll explain - the bike starts regularly, in Neutral with no...
Thank you woodaddict. I check the belt often, and it seems fine even now. I'll do your test anyway and let you know. I've changed the front pulley more than 20,000km ago and it has never given me any...
Thank you all for the replies. It seems strange to me that it could be the front sprocket as this cyclical noise only appears when the throttle is released and ends as soon as you stop, even with the...
Intersting. Could you write your experience? It could be useful to me before intervening unnecessarily by dismantling unnecessary parts. I’ve never changed the belt. It seems good.
Thank you very much for your valuable reply. Today I had a little more free time and did some tests. One of these was going to the top of a hill and going down in N gear and the bike didn't make any...
Good morning guys, I need your advice and help. I am the owner of a 2018 Can Am Spyder F3s with SE gearbox with 54000km, which I have always carried out maintenance on. I have always used fully...
Many thanks guys for your informations! This forum is gold! Anyway, the kenda tires we were talking about meet my expectations so i think i will continue to use them. I am happy to have discovered...
the stock tyres on the spyder have written “mc” on the side of the tyre, (the same is shown on the registration certificate) therefore specific for “special motorcycles purpose only”. if you can...
Italy: 8.20 dollars/gallon today
In Italy the laws are very strict, in fact if you mount the tires that are not homologated or shown on the vehicle registration certificate, most likely at the first police checkpoint your spyder ...
I live in Italy nick!
What kind of tour you’ll make? Nature? Art tourism? Mixed?
If you want,I could suggest some suggestive and iconic locations where you can ride in the middle of the mountains....
Really really nice! Hope you’ll enjoy the tour! I live in Europe.
Motul 7100 5w40 run perfectly for me.(South europe clime)
Here Italy.
2,15 US dollar/1 liter (0.26 us gallon)
Many thanks for your advice! I hope you can see now!
hi guys, lately i lost one of the rear wheel axle nut cover. so having the other still available, we redesigned it in 3d with autocad trying to replicate it as faithfully as possible. we have...
Yes guys, a funny way to spend your free 15 hours!��
After this, I’ve re adjust the belt and seems all fine.
The spyder is a really piece of art for me.
Unfortunately not so perfect, but this is...
https://imageshack.com/i/pohaRwOip
https://imageshack.com/i/poiicb8mp
https://imageshack.com/i/pmKTbdHAp
https://imageshack.com/i/pmBe82rup
https://imageshack.com/i/popSyv35j
Yes guys. I’ve already bought the moly paste for the crankshaft and the loctite 243 medium strength for the new bolt that I will torque to 125nm. As soon as I have finished the job, I will post the...
I’m doing this maintenance because this summer I will do over 4000km around the Alps.
Last summer I made a tour of Sud Tyrol, an Alps’s region here in Italy, with Stelvio Pass, Rombo Pass, Pordoi...
thank you so much guys for your valuable advice. we tried with different extractors but it didn't move in the slightest. we also applied heat to the front sprocket but not excessively, for fear of...
Thanks for your answer.
You mean that the front sprocket is slipped slightly on the drive shaft?
Because I've checked, but everything is in the right place.
But there is a lot of rust. It seems...
Hi guys.
I'm writing from Italy. This morning I’ve tried to change the old front sprocket with new, on my F3S 2018. I've got 29000km on the F3. The only problem that I have is that I can’t get the...
Thank you mako! I’m following your thread.
I’ve order today the parts from CAN-AM ITALY.
They will be sleepless nights ��