Had hyper flash before the led install....once installed I used the Lamonster video on correcting the hyper flash....works great (16 F3T)
Type: Posts; User: Bruisr
Had hyper flash before the led install....once installed I used the Lamonster video on correcting the hyper flash....works great (16 F3T)
Just did the install....Excellent upgrade;)
There’s a monthly group meeting tomorrow at 9am at the Pro Shop...ride is to Temple Bar
174502
Bark Buster...I have the Tricled convex mirrors..no obstruction of rear view with hand guards
https://www.amazon.com/gp/product/B071FR4JHR/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I ordered the Air Hawk and returned it...this is much better in quality and comfort
https://www.spyderlovers.com/forums/showthread.php?116248-Auxiliary-lights-(fog-lights)-for-F3
Currently have an 16 F3T with Lamonster/Ultimate backrest. Can the F3 Monoseat cowl be utilized as a replacement for the passenger seat?
169180169178i
The BarkBusters did not interfere with my rear mirror vision(also have the Tricled convex mirrors). I was able to keep my LidLock helmet holder using longer metric bolt(6mmx60)😎169179
Would it work with Lidlox helmet lock as far as the installation?
Are both seats the same or is the upgraded cover on the F3L added comfort😳
Just had the “wedgie “ installed today by Joe and Ann...what a difference!...best low buck repair (for awhile I thought I had nystagmus)...Why didn’t BRP address this to begin with?(16 F3T)
I had my first oil change at 1456 miles and the dealer did the 3000 mile service then at the same time. Now I’m wondering if the service they did will count as the 3000 mile service. I’m from the...
I took a piece of 3M foam tape....folded it in 2 and placed it between where the mirror mounts to the cowl...now it’s as ‘sturdy ‘ as the left mirror...no vibration 😎
I grew up 2 hours in northern Maine from the BRP facility ...on Friday’s during the winter season I would ride my Ski Doo to school and whenever I could do other rides. I found that riding my F3T is...
Just make sure your 8mm is 6 point deep socket
I used a utility knife (carefully) to slit the rubber base at the base of the antenna then used a wire cutter pliers the antenna off( it was a spring base).. then a 8mm socket for removal...BRP...
I found no difference in reception.. distant and local stations were the same.... it has a copper core wire vs steel which improves reception...😳
https://www.amazon.com/gp/product/B074M41LQR/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I had the same reservation cutting the base of the antenna as Lamonster did but it worked.. then an 8 mm...
I have the bypass pipe and Big City baffle. I’m in the process to add the Can baffle this week to “ tone” the exhaust noise down a bit more. Everything concerning this modification was correct from...
Look at Rotopax...
Example if you use a replacement K&N on my Polaris Razor 1000 it’s guaranteed to suck in dust and void the warranty.... bad idea😳. The OEM paper filter is superior in filtration and the volume of...
Get it laser aligned.. had the same problem on my FT 3😎
Ditto on Joe and Ann👍👍😎..awesome people 🍷
I was quoted 1.5 hours for the grips. At the same time I’m having the 3000 mile service done and short reach handlebars installed😳
My solution to ramps... plus there’s a 4500lb rolling air/hydraulic jack between the runways.
Closer to the rear. Fitting test for me was to sit on the trike with feet on the foot rest. Place your hands on top of your knees and raise them to the level of your existing handle bars. The short...
It’s called the short reach handle bars. I test fitted these handle bars on Ann’s F3T and it was perfect for me. Dealer quoted $150 installed. I also have a F3T with U Fit in position 3
Just had my alignment done by Joe and Ann(and a few other upgrades) at Squared Away.. what a difference😎. ... seriously when one spends 20k plus on these Spyders... what’s $120 to get it right:yikes:
:yes:Independent of the sway bar.. Joe was able to pick up Ron's sway bar at the St George Spyderfest. I was initially planning to have Joe install a belt tensioner and alignment.. now the sway...
Ron's sway bar and laser alignment on my F3T this weekend.. can't wait 😎