Attached is a pdf copy of the bulletin.
Type: Posts; User: Spydel
Attached is a pdf copy of the bulletin.
Below is the link for the TSB for the inspection and interim fix.
https://static.nhtsa.gov/odi/tsbs/2022/MC-10214930-0001.pdf
I believe it is called a “dart.” Try part nbr 293730024.
The key for the spyder normally works the gas cap too.
Lamonster Garage also sells a replacement for the entire assembly that does not require a key.
Check out part nbr 517302785 for the clips. You will also need part nbr 293150089. Cheapcycleparts.com has them.
Diamond Motor Sports in Camden, DE is pretty much your only local Spyder dealer.
Remove the battery cover and you will find the connector.
See post 1 images. It is on the Kanine.
Check item 5500a under BODY AND ACCESSORIES STORAGE TRAY in the above link.
You can buy the “shields/boots” from BRP to fix the issue.
They have the center open and just bolt in. That is what I
did after installing the Lamonster fog lights. They fixed the
gap issue.
What needs to be done about the antenna when doing this?
They are in the process of relocating. Forms will be updated after relocation is completed. Probably in November.
The GPS connections for the harness is on the left side midway back. I installed my Zumo 660 using BRP harness there. It was plug and play connection.
Lift from the back of the seat when removing it while the key is depressed and turned to the seat position.
Thermostat? Bad, stuck, or installed backwards/reversed?
Have you tried both with the ignition on and with the ignition off? Checked the fuse?
Their email address is:
valuacc@valueaccessories.net
The benefits are still there over the stock one. Additionally the heim links are metal instead of plastic.
It should have come with 24 month warranty when purchased new. Depending on original purchase date may still be under BRP warranty.
The required mileage is 7500 for out of state vehicles for them to not be considered new in meeting California emissions requirements.
Depending on the emissions label on your Spyder it may be...
I believe that the thumb drive needs to be formatted to FAT32
The cat bypass has been sold.
Try a right mouse click on the download link and choose save as.
The reason it is opening the file when you download is because of the file associations on your PC.
Yes, you can get one for 998. Lamonster Garage sells one on its website.
Baffles are sized according to the exhaust pipe size.
I have a new never used/installed Lamonster/PitBull stainless steel cat bypass originally bought for a 2013 RT.
It was listed as a V-Twin 991 Primary Muffler Replacement pipe when I purchased it. ...
The missing bolt head covers can be ordered from BRP. There is a part number for them.
I have a new never installed "2013-2014 RT Black Currant Hood 705006301 OEM" for sale. I purchased it and never installed it before I sold that Spyder.
I have a new never used/installed Lamonster/PitBull stainless steel cat bypass originally bought for a 2013 RT. PM me if interested.
162469
Is the magnet not part of the windshield motor?
There were two bolts holding the sway bar in and two additional channel stiffener bolts on my F3. For me it was easier to remove the splash guards/pans in front of and behind the sway channel frame....