We are in the gotta go see mode... Debating if going west this fall but this sounds very tempting. We attended the Owners event years back and enjoyed riding the area.. We see where there is power at...
Type: Posts; User: Schnauzer
We are in the gotta go see mode... Debating if going west this fall but this sounds very tempting. We attended the Owners event years back and enjoyed riding the area.. We see where there is power at...
you from Ark. you need some shovelhead drag pipes..
Actually what I'm looking for is the collector coupling to the cat along with the bend to the muffler. I tried the local shop and they said they cant make it, probably didnt want to. So if anyone has...
Working like it was engineered 5' is my magic number. pulled like a dream even above posted hwy speeds. Slight tug on rough roads . No no exhaust even when drafting an 18 wheeler.. I'm...
I'll be in Tyler this weekend, just might be able to twist away for 1/2 day. I like to eat. I'll google El Toro. Everything revolves around a buddy coming down from Little Rock. Be nice to meet some...
Added the new 5' tongue today,{2x2x1/8} and was able to turn the ice chest length ways and still have 2'6" clear to the rear of the bike. I'll finish the wiring up in the morning and take it out for...
you may want to check, there was a bulletin that went out correcting the amount of oil required.
I have a 2015 Rtsm6 and run 4.9 qts. it's full. top of the mark. The extra oil cause crank pressure...
Yes I moved the screen up slowly as I traveled. I can fix this with Exhaust mod, but since the bike is her's I have restraints.:banghead:..
I have a real nice setup for a shovelhead that would look...
I will need to do something to stop the air flow from coming from behind. I took a piece of 1/4" cardboard today and cut it like a flap over the trunk. Taped it down and took off. At 60mph it was...
nice looking air deflector setup. I need to contact them and see about ordering one.. thnx
Good looking setup by the way. We'll be taking ours out this weekend and next also. short trips but...
It doesn't matter which bike I on. Her Spyder or my Harlwey, I wave at 99% of the riders. miss a few. But I don't do 2 down low. I give'm 3% up high....
I removed the icechest and folded the adjustable BRP vent wings in. it did make a difference but did on an occasion smell fumes.
I have the classic , only 6" difference in total length and width. Before going with brakes do some extensive research. From what I'm understanding it is not in the best interest to run brakes on...
Hmmm Stacks with rain clappers.:shocked:.
so yours are looking down. guess better get out the sawzall and mig and do some mods..
I recently purchased an Aspen Camper. Pulling it with 2015rt. We are getting real bad exhaust fumes when traveling. Stock exhaust.
I posted this on other sites with this type trailer.
But mainly...
Is the headlight wiring the same on the 2015 RT as the 2011.
never mind. I ordered the wrong kit..
H3 instead of HB3... Duffuss
Delete this please
Keep in mind if you go by the manual. the quantities of oil required are incorrect in the manual for the 1330 ace.. They messed up and printed 5.2 qts for a SM6. Actually should be 4.9 quarts. to...
Well all went well. No vibration at all. Not sure if any damage will occur with lack of tension. but if the vibration goes away I'm in with both feet.. Good luck out there getting your dealers to get...
ours was vibrating at 80 mph up.. just turned 4000 on 2015 RT
.. Had it down to install trailer hitch. I left the rear wheel off the ground and set belt to 3/4 twist. sat it on the ground and it was...
Wow.. appears that riding to Walmart is your limitations.. should've bought the peddling kind with the basket in the back... Riding dirty will increase your chance in the removal of your butt from...
Our was clicking just like you reffer, it would after a few tries finally start. We were told that we were not holding it correctly... this went on for about a year.. At Spyderfest this year, BRP rep...
2011 replaced 2012 almost 365 days to the letter.. hot in Tx, and really hot under the hood.. 118*-127* on the screen Temp display
I did visually check them.. I guess I need to pull a vacuum on them to see.. have that tool at my dad's "Roadtrip"
I had done some reading where they had removed the canisters, just wasn't sure...
are you reffering to the Map sensor vacuum lines (2).. changed them last year..would not idle. but no codes...
the only hose not inspected was from the evap to the intake.. will do that.. I would...
We just started getting it as well.. Took the fuel filter out and changed.. gas was a tad bit nasty looking.. won't be going back there anytimesoon.. reputable establishment also... you never know.....
Just how big is this tree, We have our tent and couch along with the big screen tv.. frig coffee pot.. all in one lol
How big is this tree, got my tent also...
Thanks that really helped... I believe I can make all the tires work, just gotta go find a used tire to place on the rear before spending another butt-load on a new tire I can't use.. I can always...
I believe he was refering to the original post that the tire is 24" tall mounted, where as the oem is only 21"..