Body Pins?

I have a 2012rt. While I was checking the feasability of installing an air horn I noticed that at least two of the plastic/nylon pins that hold the body panels on were broken.The panels are the ones that are closest to your knees. Are these pins basically the same size or different lengths at different locations? Does anybody have a part number for these so I could some replacements? Thanks

You can buy them by the bag on EBay... :thumbup:

Most autoparts stores also have them. Assuming you are talking about the little black pop up center pins...:dontknow:

Spyderpops ( one of the sponsors here ) sells them for 10 bucks for 20 of them. Thats a pretty good deal.:bowdown:

They Are Not the Rivits with the Pin in the middle. They look like the pins that hold that rear quarter round piece that pops off to check the oil on the left side(as you sit in the drivers seat) of a 2012 RT. They fit into a grommet in the frame and are held into the Body Panel with what looks to be a stainless steel screw/bolt with a star indentation to tighten it. Anybody with a 2012 RT know what I'm talking about?

I think you are looking for the angled knob, #2 on this page... http://www.cheapcycleparts.com/oempa...cessories-side
Part...http://www.cheapcycleparts.com/oempa...46/angled-knob

Quote:

---

Originally Posted by SpyderSteveFL

I think you are looking for the angled knob, #2 on this page... http://www.cheapcycleparts.com/oempa...cessories-side
Part...http://www.cheapcycleparts.com/oempa...46/angled-knob

---

thanks for the link on this one steve ...

Quote:

---

Originally Posted by Tomline

They Are Not the Rivits with the Pin in the middle. They look like the pins that hold that rear quarter round piece that pops off to check the oil on the left side(as you sit in the drivers seat) of a 2012 RT. They fit into a grommet in the frame and are held into the Body Panel with what looks to be a stainless steel screw/bolt with a star indentation to tighten it. Anybody with a 2012 RT know what I'm talking about?

---

I know exactly what your talking about ......... they where such a pain in the A** to deal with I just re-placed mine with REAL screws that go into REAL pieces of plastic :clap::roflblack::roflblack::roflblack:........... .. Problem solved - forever ..... Mike :thumbup:

Quote:

---

Originally Posted by SpyderSteveFL

I think you are looking for the angled knob, #2 on this page... http://www.cheapcycleparts.com/oempa...cessories-side
Part...http://www.cheapcycleparts.com/oempa...46/angled-knob

---

:agree:

Quote:

---

Originally Posted by Bob Denman

You can buy them by the bag on EBay... :thumbup:

---

What size are the body panel screws Bob Thanks

Quote:

---

Originally Posted by Tomline

I have a 2012rt. While I was checking the feasability of installing an air horn I noticed that at least two of the plastic/nylon pins that hold the body panels on were broken.The panels are the ones that are closest to your knees. Are these pins basically the same size or different lengths at different locations? Does anybody have a part number for these so I could some replacements? Thanks

---

Nuts...I thought this thread was about body piercing....

GOOACC Nylon Bumper Fastener Rivet Clips Automotive Furniture Assembly Expansion Screws Kit Auto Body Clips 8mm - 40PCS


Free shipping with amazon prime.

I was missing one, so got these and now have spares.

John