For those of you who have Special Editions or any others with a matte black finish, what do you
use to clean/polish those surfaces? I have read that you should not use a cleaner wax.
Printable View
For those of you who have Special Editions or any others with a matte black finish, what do you
use to clean/polish those surfaces? I have read that you should not use a cleaner wax.
We get good results using Harley Davidson Denim Paint Cleaner and a microfiber towel. Can't remember what a quart bottle costs, buts it's probably the cheapest item at a HD dealer!!
I use Lucas Slick Mist Speed Wax. I spray it on a damp micro fiber cloth. Works well for me. I also use it on the painted surfaces as well when I wash the Spyder. Spray it on the wet surfaces and dry with a micro fiber cloth. I think you will be pleased with the results.
303 aerospace. Great product for all rubber and black plastic. Probably good on other colors
Have you checked out any of these existing threads?? :dontknow:
https://www.spyderlovers.com/forums/...aning%3B+Black
https://www.spyderlovers.com/forums/...aning%3B+Black
https://www.spyderlovers.com/forums/...aning%3B+Black
https://www.spyderlovers.com/forums/...aning%3B+Black
https://www.spyderlovers.com/forums/...aning%3B+Black
https://www.spyderlovers.com/forums/...aning%3B+Black
https://www.spyderlovers.com/forums/...aning%3B+Black
There's probably more threads out there asking the same or similar questions that are well worth a read too! :thumbup:
Ooooo--death by a thousand cuts.Quote:
Originally Posted by Peter Aawen
DO NOT polish matte or satin paint. Do not use any products that contain wax on matte and satin paint.Quote:
Originally Posted by johnv50
There are a ton of references and video by reputable organizations in the care and protection of matte and satin finishes.
Her are a few:
https://auto.howstuffworks.com/car-matte-finish.htm
https://autocarehq.com/how-to-take-c...tte-car-paint/
https://www.kbb.com/car-advice/matte-paint-finish/
For my 2022 Sea to Sky, I had a special sealant applied a couple of day after I picked-up the bike. It wasn't cheap, but well worth the money.
I wash my vehicles using the 2 bucket system with particle separators at the bottom of the buckets.
I lightly wash using a Chemical Guys microfibre Chenille wash mitt with ph balanced non-wax car wash shampoo by basically letting the wash mitt glide on the surface of the paint. I may apply a bit more pressure for stubborn spots, but rarely have to due to the slick coating on my bike.
I blow dry the bike using a Toro electric leaf blower. https://www.toro.com/en/homeowner/ya...ower-vac-51621
The only chemical that I use if for the seats. This is what I use: https://www.303products.com.au/produ...-complete-care
Hope this helps
This is what we use on our bikes. Watch the video.
https://www.lamonstergarage.com/blac...are-lamonster/
I watched the video and it looks like a really good product. Does a nice job on repelling water and not leaving water spots. It's also lot cheaper than fancy protectant.Quote:
Originally Posted by Lamonster
Thanks for the post.
I found 2 bottles, one with a sprayer, on Amazon that consists of a matte black cleaner and a matte black sealant.
I ordered them both and will report once I get a chance to try them, probably not until spring..
Chemical Guys SPI_995_16 Meticulous Matte Detailer and Spray Sealant
Chemical Guys CWS_995_16 Meticulous Matte Car Wash Soap (For Foam Cannons, Foam Guns or Bucket Washes) Safe for Satin & Matte Finish Paint
johnv