I like it. Is the flagpole SST railing also?
Printable View
i purchased the can-am spyder compatible trailer hitch on ebay works great i put a 4 foot section of all thread that fits tight inside my flag pole and double nutted it on the hitch where the ball goes works great
I may have solved my flag holder. I just bought a Pakit Rak and the hitch adapter looks as though it may work great.
Two birds with one stone!
Now make a been in the steel up and will look good. The way you have it now is to much down and out so been it up and will look great. Oky
Call me later in am ok about flag holder got some steel that might work square steel.
I’ve been using a Rivco pole mount. It’s on a 1/4 x 2 x 4 plate that has a slight offset bolted with the hitch ball stud. The pole mount is not 90 degrees so old glory must go down the freeway at an angle. I use a 1 in metal conduit as the pole and use tag lines from an eye bolt on top to the rear grips as a back up in case the pole comes out on rough roughs with the swing arm action. I do have the pole secured with a keeper pin but bolts and welds have been known to fail before. Where are you buying your flag. A flag made strong enough for high winds is a must. I’m on my 5th flag already from a company down the freeway that sells them to local schools, etc. I live in an area with high wind activity and when you’re traveling into the wind at 60 plus mph they don’t last long. I also have a flag that’s like a net which has been my best. I need to get it sewn up because it’s seen some action a bit. It’s legal to wash and repair the flags btw. I’m a RC in SouCal which is one of the busiest in the country.