1 Attachment(s)
Proper F3 Front Sprocket Side
Hi all,
We apologies for providing with an inaccurate information. Based on other members input, we've taken the extra to reach our Spyder Product Specialist to take a second look into your situation.
The answer we should have shared is the following: the offset, meaning the deeper side, is actually on the engine side rather than outside. Our mistake was made when we looked at 2D technical drawing but this time we used 3D version.
Please find the 3D visual drawing so you will be able to see how the proper installation.
If you have any concerns, we recommend going to an authorized BRP dealer.
https://mail.google.com/mail/u/0/?ui...3ec52aad3db&zw
Hope this helps!
BRPcare
1 Attachment(s)
2015 F3S Pulley is Fine with 10K Miles
Well, this has been a very interesting thread and I decided to go out this morning and pull the front pulley cover on my 2015 F3S SM6 to see if I had the dreaded "rust". What I found on my 10,000 mile trike was a very clean non-rusty front drive pulley with the numbers and manufacturing date facing outward. Hooray!