My guide to Audiovox Cruise Control Installation

Thanks to forum members across multi forums for posting their pictures and sharing information... I used the following pictures as a guide to install my Audiovox cruise control..

For servo and vacuum canister location:
http://bigbikeriders.com/photopost/d...1ccspyder1.jpg

For Control Panel mounting..
http://www.spydertalk.com/forums/upl...1206306103.jpg

For cable to throttle hookup..
http://www.spydertalk.com/forums/upl...1205621738.jpg

For the vacuum hookup...
http://kaitsdad.smugmug.com/photos/3...61_MgVRx-L.jpg

http://i186.photobucket.com/albums/x...terpackage.jpg

http://www.spydertalk.com/forums/upl...1200876175.jpg
http://www.spydertalk.com/forums/upl...1200876168.jpg

For the wiring....

http://www.spydertalk.com/forums/upl...1206193329.jpg



This the picture I used for the coil hookup..
http://www.spyderlovers.com/forums/p...pictureid=7197


The picture for the Servo switch settings....
http://www.spydertalk.com/forums/upl...1206104301.gif


This is my completed installation...
http://i421.photobucket.com/albums/p...r/PICT2919.jpg

http://i421.photobucket.com/albums/p...r/PICT2916.jpg

:2thumbs: Most of those were my install pics. :doorag:

Thanks for the pics.
I've got an Audiovox electric version on the way but I suspect that many of the connections other than vacume are the same. :2thumbs:

Which cruise controll are you using? the cs-100

Quote:

---

Originally Posted by tweeder

Which cruise controll are you using? the cs-100

---

Yes...the cs-100..

Do anyone near lower Alabama do this install for the mechanical handicap?nojoke

Hamie or Lamont, On the wirering diagram., does the gray wire comeing out of the contol box, also go to a switched 12v, as the red ??

Quote:

---

Originally Posted by madjack

Hamie or Lamont, On the wirering diagram., does the gray wire comeing out of the contol box, also go to a switched 12v, as the red ??

---

That's where I put mine... working great....

anybody install the electronic one yet? Where is the VSS wire?

I think so, I believe it was Lamonster even. The controller was NOT enviromentally sound if I remember right, seems as though water shorted it out 2 or more times.

Lon, my throttle hook-up. THe cable is held in place by a cable tie and works perfectly.

http://i875.photobucket.com/albums/a...3/throttle.jpg

Quote:

---

Originally Posted by AMTJIM

I think so, I believe it was Lamonster even. The controller was NOT enviromentally sound if I remember right, seems as though water shorted it out 2 or more times.

---

I ordered the waterproof skin for it from Murph kits ($5)

OK, guys... how about everyone posting pictures of how they mounted the control switch for their control. I'm sure there are a lot of good ideas out there. Also, would someone post the dip switch setting for the electronic audiovox cruise control that you found most appropriate? thanks

You'll see mine in here.

http://www.spyderlovers.com/forums/s...ad.php?t=17229

Freddy,
How about a close-up of that mount. Can't see how it attaches. Aluminum?

Quote:

---

Originally Posted by lonlawrence

Freddy,
How about a close-up of that mount. Can't see how it attaches. Aluminum?

---

I'd have to get my son to do the pic thingy. It has a right angle bend at the top and is attached with existing bolt on the controls. It's stainless steel (scrap from his work) but aluminium would be just as good. Having it located there I don't need to let go of the bar as it's just a thumb stretch away.

I wish I had found your instructions before I started the install, but I guess that it only made me appreciate the guide even more. Thanks it works great. Ken Daugherty

Quote:

---

Originally Posted by Lamonster

:2thumbs: Most of those were my install pics. :doorag:

---

Lamont u want credit for everything lol :roflblack::roflblack::roflblack: