Looking for pics of floorboard or footpegs for GS or RS.
I need for my 2008 GS Spyder and want to 'see' before
I buy.
Thanks!
Printable View
Looking for pics of floorboard or footpegs for GS or RS.
I need for my 2008 GS Spyder and want to 'see' before
I buy.
Thanks!
Check seal floorboards. they are a site sponsor, you can click on there banner on the home page.
Hi pamopfl,
You can go to sealfloorboards.com to see floorboards for your 2008 GS It's the same as the RS. I had a 2009 RS SM5 and designed the Seal Floorboards for it originally. I also offer the RS SM5 (manuel version). Hope this helps.
Ride in comfort,
John
Seal Floorboards
To clarify, I'd like to see some on the Spyders themselves.
I made my own as well.............. Hands down it has a better name than any others on the market. I call theses 2 X Floor, floorboards. These other guys really got jealous when I came out with these and I wouldn't share the secret on how I made them. :thumbup:
i made my own. not terribly hard to do, and cheap. 40-50 bucks. arntufun doesn't like windshields or floorboards. he DOES like to crawl around on the floor doing mods.:roflblack::joke::roflblack:.
The 2 X Floor Just went on my wishlist... What will they retail for... Tree Ninety-Nine.....
Here are my highway pegs...
I have the Rivco floorboards and highway pegs. Use the floorboards 95% of the time. Would never go back to just foot pegs. It's so great riding with your feet and legs in a comfortable position. Highly recommend the Rivco's for the GS/RS.
I like the rivco boards. Drops your feet and still has sport pegs. Good anti-vibration rubber mounts.
I have the isci boards and they have a home page with a spyder with the boards on it.
Here's a couple of pics from ISCI's webiste...
http://isciride.com/iscirtpartsinstalled.htm
Just want to throw this out there...
Many people don't know this but the RIVCO CA020-WO will allow any aftermarket or Harley-Davidson board that are made to fit the FLH.
Some of these Spyders would look great with Diamond plate boards, Flames boards, Skulls and the list goes on!
Private message me or email me at cjanikowski@rivcoproducts.com with any questions!
Kuryakyn ISO Pegs
Sent from my SCH-R760 using Tapatalk 2
I won't post pics here because you have to reduce them and then IMO they don't show very well. If you want to PM your e-mail, I'll take a few pics.
Thank you kawakii for your support! Much appreciated! Glad you like the boards :2thumbs:.
Bill
the FOOT REST & FOOT PEGS are all DIY... for the FOOT PEGS, i purchased a set of OEM Rear Pegs ($130) from my SPYD3R dealer and i fabricated a frame that mounts to the chassic. i was able to maintain my Front Foot Pergs while adding the FOOT REST, giving me 3 positions for my feet, which also moved my butt when relocating my feet, causing less 'butt wear'... :bowdown: for a more comfortable long rides.... :yes:
[QUOTE=kawakii;661801]We have web boards on our RSS and love them.
Where did u get these? will they fit The 2012 RS model?They really look
great.:clap: