question about the majic mirrors
I was looking at the magic mirrors and was trying to figure out if you get 3 for each side or only 2 for each side. I saw one video where all three were replaced but then I read where people only talk about replacing the bottom two. I went to lamonster web site and from what I can tell you only get 2 per side. If that is the case do you keep spare plastic clips for the top as that seems to be a weak point in the design. Both mine broke simply removing the mirror. I ordered the factory replacements but am debating cancelling the order and getting the magic mirrors. I have a hard time justyfying it though if you only get the bottom 2.
Thank you all,
Jim
So Majic Mirror mounts don't cause any issues with gauges anymore?
Just a question.......I remember reading many posts in the past about issues with the readings on the dash when these were used. So is none of that valid anymore ? :shocked:
Guage Issues with Magic Mirrors
Quote:
Originally Posted by
teninospyder
Just a question.......I remember reading many posts in the past about issues with the readings on the dash when these were used. So is none of that valid anymore ? :shocked:
First off let me state that the magic mirrors upgrade is the best thing I ever did. The mirrors are more stable and more secure (less vibration) than the manufacture mounts. I did have the issue with the gauges in the dash (Fuel and Temperature) reading off due to the magnets. What I had to do was to flip magnets over and find the right combination of polarity so that the gauge would read correctly. It took a few tries but I got it right. Also, It was mentioned that a slight "rerouting" of the wire harness in the dash (not much would be required) would also help with this.